top of page
MMA차선 8.jpg

ES-STONE LW 400

It is a two-component room-temperature curing product using Methyl Methacrylate Resin.
It is a high-performance paint with excellent composition and corresponds to Korean Industrial Standard KS M 6080 type 5, and is used to mark lines on road surfaces, runways, etc.
It is used. Environmental label certification was granted by the Korea Environmental Industry & Technology Institute for the reasons of reducing local environmental pollution, reducing hazardous substances, and reducing air pollutants.

TWO- COMPONENT COLD PLASTIC

Specificity

Excellent adhesion to asphalt.
It has excellent wear resistance and impact resistance and is highly durable.
Excellent low-temperature hardening in winter.
This is a room-temperature curing product and does not require any other heat source.
Excellent adhesion to glass beads.
This is a P7-R5/RW4, P7-R4/RW4 grade product.

MMA도료4-1.jpg
KakaoTalk_20230822_122547943_05 (1).jpg

USAGE SECTION

Centerline of the road, road boundary line, no passing line, crosswalk line, stop line, parking line, letter symbol, etc.
Paint for road markings that require retro-reflectivity performance

ES-STONE LW 400 INTRODUCTION

Appearance "Liquid A (subject): Liquid;
Liquid B (hardener): White powder, solid content of approximately 99%
Recommended film thickness 1~2mm Theoretical requirement 2.4Kg/㎥ (based on 2mm thickness)
Viscosity 45000 or less (CPS/25℃) Expiration date "6 months
"Period under 25℃/indoor storage/sealed conditions)"
Packaging unit "Liquid A (subject): 25Kg (12.5L), 20Kg (10L), 15Kg (7.5L)
Liquid B (hardener): 500g, 300g, 200g
"Dilution ratio" hardening accelerator:
25g~50g (spring/autumn 5℃~15℃)
50g~150g (below 5℃ in winter)
UP softener: 0.5"

Exclusive hardening accelerator A2 accelerator Exclusive softener UP softener
Curing time: within 15 minutes (25℃),

vehicle travel time: 30~60 minutes

길에서
KakaoTalk_20231019_150723546.jpg
bottom of page